Price: [price_with_discount]
(as of [price_update_date] – Details)
[ad_1]
Specifications:
Condition: 100% Brand New
Material: Zinc Alloy, Chrome Plating
Input pressure: <15Mpa
Output pressure: 0.25Mpa
Flow adjustment range: 1-10L/min
Safety valve: 0.5Mpa automatic exhaust
Imported thread: G5/8″ male thread
Export thread: M12x1
Operation method:
1. Add distilled water to the humidification cup. The water level in the bottle should not be higher than the water line, but it should not be lower than the water line. It is forbidden to replace with saline.
2. Before inserting the inhaler into the oxygen supply terminal socket, first turn off the flow adjustment switch, and adjust the direction of the oxygen quick plug, then insert the quick plug into the oxygen supply terminal socket hole, when you hear the “click” sound and see the oxygen supply terminal. When the locking sleeve of the socket is automatically slid, the quick plug and the oxygen supply terminal socket are connected and locked.
3. Insert the oxygen pipe into the oxygen supply joint before oxygen supply, then turn the flow adjustment switch counterclockwise to open the origin, so that the float slowly rises (the scale line aligned with the center of the float is the flow reading, the unit is liter/min) The oxygen supply can be adjusted as needed.
4. During the oxygen supply process, if the water in the inhaler bottle is lower than the water line, the flow adjustment switch should be closed in time, the humidified bottle body should be unscrewed, and distilled water should be added according to the requirements of the first paragraph of this item. Screw on the inhaler bottle and continue to supply oxygen.
Package list:
1 * Medical Oxygen Machine (Gas Cylinder + Gas Meter)
1 * Instruction Manual
1 * Oxygen Tube
Note:
Please note that the new type and old type of this product will be sent rand
It is an essential equipment for oxygen therapy in hospital emergency rooms and wards. It is mainly used in the oxygen supply system of the medical center for the first-aid oxygen supply and oxygen-deficient patients in the medical unit for oxygen inhalation, scientific research institutions, industrial and mining, etc.
The bottle plug-in oxygen inhaler uses its own pressure reducing device to reduce the high pressure in the oxygen cylinder (15Mpa pressure when the bottle is full) to a low pressure suitable for human use (0.2~0.2Mpa), and then output to the human body after being moistened by water. Since the wall plug-in oxygen inhaler has an input pressure of 0.2~0.4Mpa, it does not need to be decompressed and can be directly output to the human body.
When the inhaler is not in use, the air source of the inhaler should be turned off; if it needs to be removed, hold the inhaler with your hand and remove it after proceeding (the engineering installation unit is responsible for the explanation of the unlocking method of different oxygen supply terminal sockets), after the water in the bottle is cleaned and disinfected, it is stored in a non-corrosive and well-ventilated room).
100% Satisfaction Guaranteed – If you’re unsatisfied with this item for any reason, please contact us and we will do whatever it takes quickly to make sure you are 100% satisfied. ORDER YOURS TODAY!
Warranty not applicable for this product
[ad_2]